Horizontal Glass Drilling Machine
Home > Horizontal Glass Drilling Machine
JFO-3 High Efficiency Horizontal Glass Drilling And Milling Machine For Glass Processing
JFO-3 Three heads glass drilling machine
The glass drilling machine is used for glass drilling and is suitable for drilling with different diameters. The drilling machine adopts the method of 3 sides drilling to prevent the glass from bursting. First, the drilling is done from the bottom and then the drilling is done from the top to complete the entire drilling process.In addition,it can drill the laminated glass as well.
Drilling depth can be adjusted and matched with buffer cylinder buffer bit up and down speed.When the drill is approaching the glass, the speed of the drill is reduced by buffering the cylinder to prevent the drill from rising too fast and damaging the glass.
The size of worktable is about 2250x1530x90mm，It is equipped with 4 air cylinders, which can be adjusted by the pneumatic system to lift the worktable to facilitate the dragging of the glass. When processing large glass, it acts as an auxiliary support for processing. When processing glass is not large, pneumatic worktables can be installed.
The glass drilling machine is used for glass drilling and is suitable for drilling with different diameters. The drilling machine adopts the method of 3 sides drilling to prevent the glass from bursting. First, the drilling is done from the bottom and then the drilling is done from the top to complete the entire drilling process.In addition,it can drill the laminated glass as well.
Drilling depth can be adjusted and matched with buffer cylinder buffer bit up and down speed.When the drill is approaching the glass, the speed of the drill is reduced by buffering the cylinder to prevent the drill from rising too fast and damaging the glass.
The size of worktable is about 2250x1530x90mm，It is equipped with 4 air cylinders, which can be adjusted by the pneumatic system to lift the worktable to facilitate the dragging of the glass. When processing large glass, it acts as an auxiliary support for processing. When processing glass is not large, pneumatic worktables can be installed.
- Product Detail
- Inquiry
|
Product name |
Glass drilling machine |
|
Glass thickness |
3-25mm |
|
Drilling diameter |
Dia.3-220mm |
|
Max. glass size |
2200x2700mm |
|
Power |
4.5Kw |
|
Weight |
900KG |
|
Dimensions |
2700x2200x1800mm |
